The Christmas jumper just wasn't going to happen - so I have decided to frog it. Its a pity as the stitch finally worked out for a raglan, but its too bulky. I may try the stitch again in the new year.
Meanwhile, I am thinking of making a swink , which has a knitted collar and cuff, and seeing as I just learned to knit a few weeks ago at the sew social. My first knitting is below and the dropped stitches are where I was attempting purls...... and when I cast off I used a crochet hook. Currently I am practicing some knitting before I start the sweater to make sure I can knit, as I am still unsure as what to do with dropped stitches and I certainly don't understand the book instruction! The second swatch is my second practice. Half way up, I decided to try seed stitch and I am not sure what I did wrong yet, but I had to unravel that row and start some plains and purls to get used to knitting and to be able to recognise the stitch (still all looking the same to me!)
I started on another up-sew, of an old cardigan. Its a primark from some years ago, and I used wear it in the summer, its incredibly thin, and has limited life left in it but I really like the colour, and remaking will extend the wearing of it. I have to stitch down the neckline, and fix the hem yet. It will be a rather light sweater. I had to make the front from three pieces as taking the pockets off made some holes, and the ribbed panel at the front of the cardigan became the centre back of the back and the side panel in the front! I used a basic jersey block and left the sleeve seam intact and just reattached the sleeve at the armhole.
I did manage to get my cards made and printed in time for international post dates. When I used make my own cards first, I used make a lino or etched plate and print on the press (one year I even printed wrapping paper!), but in the last few years, I found the best cards were also the quick doodles/sketches I did in my notebook and since then, I do a drawing, scan and print..............
my favourite card done in the last few years is still this one..... (I finished it in photoshop and I should have done it by hand) it reminds me of the ee cummings poem, I carry your heart in my heart
Merry Happy Christmas!
the backstorySo I am not too sure of the sequence of events, but somewhere in between my saying to my sister, Eithne, that making a dress had to be easier than replacing the skirt of last years costume (her first solo dress), and her saying that it was difficult to find a new dress for her daughter Donna (neither of them saw anything they liked in the secondhand dresses for sale), that the idea of me making the dress came into play, and both of us having the same attitude, how hard can it be.....
Donna's taste in dresses is relatively restrained. She seemed to admire certain styles, but equally shied away from actually wearing some she admired, and by a process of elimination we came up with a style she wanted, and the fabric was bought in July (I had a toile made in June). Her taste is muted, and it was decided a one colour dress, a pure purple, and Donna wanted an opening on the front which was so fiddly to get even!
I drew up some embroideries, as Donna doesn't like celtic knotwork, and I naively thought I could do it in free-motion embroidery. I am using the word naive loosely as in truth, I had never done free-motion embroidery as such (I was going to hand embroider originally but all the dresses are machine done now).
So after doing the drawings, I digitised one (another story) and emailed it to a friend far away who has an industrial embroidery machine...... and then I saw how the hand drawn and the machine lines don't work so well together, my hand drawn 'smooth' curves, became rather scratchy looking, I retraced, but it was still slightly off so it was back to the beginning. I really could not figure it out, and seemingly some dressmakers send the pieces off for embroidery and then make the dress, but I didn't even know how you would approach this, and who to send it to, and its now mid-September so I started looking at home embroidery machines. This is the type of desperate aunt I am!
I ordered a machine in October, and I got to start on the machine 3rd November and had roughly 8 days of sewing and embroidering (I work part time) to the 14th. the first few evenings I went through the machine stitches and got a feel for the machine, and from then on it was 'dress dress dress', and the work room re organised to have a second table for cutting and second sewing machine, as well as the embroidery machine on the main table!
Day 1 - Samples of patterns stitched outDay 2 - More samples, and 1 skirt panel embroidered (later changed) Day 3 - Front bodice embroidered and began running out of thread, sourced thread and ordered from Dublin to be posted down.Day 4 - Back bodice embroidered - but ran out of thread midway (so had to be ditched) cut linings, and prepped sleevesDay 5 - Back bodice and sleeves embroideredDay 6 - Basted linings, bodice sewn, 1 new skirt panel embroideredDay 7 - 2nd skirt panel embroidered, net skirt made. basted skirt to dress
The embroidery takes the longest time, after 'setting up' each skirt panels took about 4 hours each, and I also found out that it was better to have a more generous cut to each piece to keep the grains even while hooping. I downloaded some digitised swirls and joined some to make up the design. The brath design is also downloaded from urban threads. The embroidery machine is electronic which took some adjusting to, and I had a rather steep learning curve overall.
My sister and niece arrived for the fitting the following evening after work, and I sewed that evening and next morning, fixing the skirt, taking in the bodice (my niece is 12 so her measurements are changing fast!) adding more to the tutu underskirt, drafting and adding collar so they could leave the following day with the nearly finished dress to bring back as the 'bling' had to be bought and the dance teacher to see the dress, and we decided I would go up in a fortnight to help sew the bling.
The dance teacher liked the dress, and suggested HUGE stones to the front. We had decided on lattices earlier on so my sister made a start on hand sewing that and by the time I arrived 2 weeks later, she had that done, and I started hemming the dress correctly (I had it tacked), and fixing the tutu (net underskirt) and we had Donna walking, hopping, dancing, to make sure the dress was moving correctly.
The large stones were glued in place then sewn, they are quite amazing as they are crystal so really catch the light. My sister blinged the 'brath' (back cream panel which is held on with poppers) and its stunning as it has fushia and AB (Aurelia Borealis) crystals so it really pops (seriously, its like fairy lights), and then we put a small amount in the neck embroidery, as well as the sleeves, I can only take credit for the neck and sleeve placement and have now decided Eithne has a flair for the bling (I am rather conservative I have now found out).
So...... its now done-ish, the tutu/underskirt needs an adjustment (extra layers) but that will be done after Christmas. My niece is very happy with the dress and the dress was ready for the feis and she danced very well in it - and I am thinking of her next dress already!
the details
the dress took about 2 metres of duchese satin (I bought 3 metres, and had to cut an extra back panel and skirt panel), .25m cream gold satin for brath -the satin was so forgiving - only one tiny thread pull after countless rushed pinning and resewing.the tutu (net underskirt) - 2 m of purple plain net, and 1.5m of shiny net although I now think it should have another layer which would be another .25 or .5 metrethe bodice lining - white handkerchief linen remnant from TWIthe pattern - 1960s ice-skating pattern - bodice used and adapted, sleeves,collar, and skirt own draft.
the machine
Few shops in Ireland sell embroidery machines, and getting to view one was a bother. I went up to a shop in Dublin (and had phoned ahead) and they could only show me the machine but not demonstrate it (less said about that the better). I bought my machine over the phone after talking to the Singer shop in Waterford, and although I wasn't able to visit the shop (v far away), they sell a good enough variety of brands for John (owner) to go though the pros and cons (and at this stage had watched shedloads on youtube).
Topaz 25, its probably the more basic Husqvarna embroidery, but it also had the biggest available hoop (280x150mm) in my budget. I was able to join motifs to get a larger spread (ie front bodice), I still don't fancy my chances on doing a fully aligned border. It is also a sewing machine, and the only thing I didn't like sewing on it were darts. There is a baste stitch on it which is a dream (which I used a lot, both to fix dress before fitting, and also to attach stabilizer pieces to the dress). My Singer Excelle has not been put to one side though as I well prefer it for tailoring.
the verdict........
It was as well in ways it was left as late as my nieces measurements changed a lot from June to September. I am glad now I got an embroidery machine as its leading me to some other ideas and will expand my sewing. At the time I felt a bit crazy buying it, but as some extra money came my way in September I justified it that way, that, future dance dresses and having a happy niece.
Donna got two sashes* in 'the big feis' - (as well as other trophys in ard grad), when the 'sash' awards are presented its a full on fanfare affair and at the end the competitors all have to put their cups in the air - and heres a photo of one!
* I am not very au-fait with the process but my sister explains it as similar to premier league, first division, second division etc in football, and that dancers start off as bun-grad (beginners/third division) and progress up to mean grad to ard grad(high grade/first division) and there is a process which I am not sure of which allows you to dance in the championship dance (premier division), which Donna is beginning to qualify for and if you place in these you get sashes...............
